gonewild's latest activity

Update.... After all the above attempts to find the problem Hydrologic customer service sent me 2 new membranes to compare to the one...

Here is the info Hidrologic has in the manual.

The purified water fills a tank controlled by a float valve. The line from filter to float valve is about 6 feet. I really don't have...

Ray, I'm pretty sure it's plumbed correctly, based on following the install pictures. I reconnected it with the ASO block so as to...

I sent the tech support person my water analysis and he quickly replied..... I don't see anything in particular in the water report...

I contacted Hydrologic tech support and ask about the high ppm. Here is their reply. (I didn't know the o-rings need lubricant)...

Using the valve on the discharge line to create 65psi on membrane gives the lowest tds, 102 ppm. I don't understand why the old membrane...

No. With discharge line completely open pressure drops low and all water is discharged.

I have removed the ASO block and made the direct connections. Adjusting the valve on the discharge line the lowest ppm I can manage is...

🫣 I will try that in the morning. Thanks!

It does have the ASO block. I will try to attach the PDF manual for my unit.

I can take some photos tomorrow. On the morning it will have run 12 hours. The unit has two discharge options and I have it at the...

The. Filter has been running a couple hours and water tests 115 ppm.

The 50 was with the old cartridges with the pressure boosted. The instructions on the new RO cartridge said it takes 24 hours run time...

Some progress. I installed the booster pump. Pressure raised to just below 80 psi. Filtered water drop to 50 ppm. I went to the local...